Bàn chuẩn áp suất thủy lực BT 800

Bàn chuẩn áp suất thủy lực BT 800

Hydraulic comparison calibration pums BT 800

Applications:
– the testing and calibration of manometers and transducers
– combined with standard reference
– instruments.

General characterics.

– Structure in 2mm thick metal sheets designed to simplify carrying.
– The pumps made be fitted onto a work bench by means of their 4 adjustable
feet or they may be attached to a surface by means of the holes on the base.
– High pressure unit made in one piece with a brass rod.
– Bronze trapezoidal screws and nut screws with stainless steel bearing.
– Triple-spoke hand-wheel tilted towards operator.
– Sockets for 1/2″ Gas manometers with rotating screw nut and OR seal.
– Stainless steel built-in tank with hand-wheel operated head valve.
– Hydraulic liquid used: water and oil

Technical characteristics

– Range of use from 0 to 800 bar (80 Mpa)
– Interception needle valve used to pre-load the circuit
– Total capacity: 30 cm3
– Displacement/turn = 0,7 cm3 ~
– Piston with plunger stem and high pressure unit made in stainless steel
– Total screw stroke: 160 mm
– Operative stress at 100 bar: approx. 1 Kgm
– Test pressure: 1000 bar
– Gaskets in nitril rubber with anti-extrusion ring
– Measurements: 650x360x330 mm
– Weight 18 Kg

Satdard part supplied

– Ch 27 service box wrench
– 3/8″ Gas rotating connection.
– Complete series of spare gaskets
– Case for carrying spare parts.

Liên hệ đặt hàng

Hotline : 097.844.2238

Email: info@instec.vn, trieu.vu@instec.vn , tien.vd@instec.vn