Tủ khí hậu có phun muối

Tủ khí hậu có phun muối

Model: YWX-960FH 

Standards
– GB/T5170.8, GB/T10587, GJB150.11, GB/T10125, GB/T2423.17
– ASTM G85 Automotive industry standard
– Working Room Size: 1200×800×1000(W×D×H)mm
– External Size: 2500×1200×1900(W×D×H)mm
– Net Weight: About 800kg
– Temperature Range: -40 ~ +90℃
– Temperature Fluctuation: ±0.5℃
– Humidity Range: 20% ~ 98%RH
– Humidity Fluctuation: ±2.0%RH
– Power Supply: 380V 20KW 50HZ MAX 30A
– Materials: PVC Acid and alkali resistant material
+ The refill water tank for NaCl adopts hidden water level gauge, which is easy to clean and not easy to break.
+ SUS#304 stainless steel high-pressure barrel is the best insulation effect for saturated air barrel.

* Salt spray test
– wettest Saline spray Laboratory: NSS, CASS
– Room Temperature：10℃～50℃
– Saturated air barrel temperature: 47℃ ±1℃

* Wet Test
– Room Temperature: 40℃ ±2℃
– Room Humidity: 93% ~ 100%RH
– Saturated air barrel temperature: 47℃ ±1℃
– Dry Test Room Temperature：15℃~50℃ ±1℃
– Humidity: ≥30%RH

Air Supply System
– Air pressure is 1kg/cm2 divided into two stages of adjustment, the first is the imported pressure regulating filter with filter water function,
– Approximately adjusted to 2-2.5kg/ cm2, the second for imported precision pressure regulating valve, adjusted to pressure gauge 1kg/ cm2 pressure gauge.
Spray Way
– Adopt Benoit principle to suck brine and then atomize, atomization degree is uniform, no blocking crystallization phenomenon, to ensure the standard of continuous testing.
– Nozzle: made of special glass nozzle, can adjust the size of spray volume and spray Angle.
– Spray volume: adjustable 1.5 ± 0.5ml 80cm2/Hr (16-hour average volume).
– 40L large brine tank can spray continuously for 48HR. Heat System
– External hot air heating method, fast heating speed to reduce standby time, low component damage rate.
– Using S.S.R control heating power, accurate temperature, less power consumption. (Titanium alloy corrosion prevention tube adopted by electric heat pipe)

Electric Control System
– The main controller adopts 7-inch LCD man-machine interface, and the main screen can plan the test program.
– Fixed conditions can be set time 0-999 H 59 MIN.
– Program mode can be set at the same time salt spray, wet test
– With power off memory device, can continue to perform the rest of the program when the power back.
– Temperature and temperature can be used for rate control, and has the function of self-correcting temperature and humidity reference point.
– Temperature and humidity sensor using DIN PT-100Ω （platinum induction）. Water supply and drainage system
– When the water level is too low, it will be automatically replenished and can be manually replenished.
– Drainage adopts acid and alkali resistant and corrosion resistant pump to increase service life and reduce waiting time for drainage.
– All pipe fittings are imported acid and alkali resistant corrosion resistant components, long life. Humidity System
– Adopt electronic bit P.I.D micromotion humidifier system.
– Double protection device for overheating and overflow.
– The humidification and dehumidification systems are completely independent.
– Water level control of high mining molecular floating ball water valve.
– Fully automatic humidifying water supplement device. (The machine shall be connected to water source) Dehumidify System
– Using refrigeration evaporator condensation dehumidification method, humidity stability.
– The bubble accelerates the humidifier and the humidity stabilizes at a fast rate

– Adopt high speed return air exhaust system. Protection Devices

– With leakage power off type fusible protection switch.

– Low water level protection switch.

– Low salt liquid protection switch

– Double over-temperature protection device, prevent mechanical action or electronic action out of control

Liên hệ: 

Hotline : 097.252.0991 – 097.844.2238

Email: info@instec.vn , trieu.vu@instec.vn ,tien.vd@instec.vn